- Plug and play on cobots The drive controller is built into the gripper, so it mounts on the flange and runs without an external controller or air supply.
- 15 to 50 N per jaw Gripping force is set in software, gentle for fragile parts and firm for solid ones, for workpieces up to 1 kg.
- 37 mm stroke The jaws open wider than slim 26 mm grippers, so one cell handles a wider range of part sizes.
- Holds on power loss The jaws keep the workpiece when power drops, so parts are not released during stops.
- IP54 protection The body resists dust and splashing in normal workshop and machine-tending conditions.
- Standard industrial control Modbus RTU over RS485 and digital I/O are standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options.
Description
The PGC-50-35 is a collaborative electric parallel gripper made by DH Robotics and supplied by Dobot for its cobots under part number 1200000254. It bolts to the robot flange, takes its power and signals through the tool connector and carries its drive controller inside the body, so a cell needs no separate gripper controller and no compressed air.
Each jaw grips with 15 to 50 N, set by the program, across a 37 mm stroke, and DH Robotics recommends workpieces up to 1 kg. A precision planetary reducer with rack and pinion drives the jaws, which open and close in 0.7 s each way and repeat to ±0.03 mm. The jaws keep hold of the part if power is lost, which keeps a cell safe through stops and outages.
Of the two small DH parallel grippers Dobot supplies, it is the better protected one: rated IP54 against dust and splashing, at 124 × 63 × 63 mm and 0.5 kg, for machine tending, assembly and handling in ordinary workshop conditions. Modbus RTU over RS485 and digital I/O are standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options.
Next to the slim PGEA-50-26, which has the same force range, the PGC-50-35 trades speed for protection and travel: a wider stroke and IP54 instead of IP40, against the PGEA's quicker cycles. For round or irregular parts up to 3 kg, the adaptive AG-95 is the better fit.
Key Capabilities
- Plug and play on cobots: The drive controller is built into the gripper, so it mounts on the flange and runs without an external controller or air supply.
- 15 to 50 N per jaw: Gripping force is set in software, gentle for fragile parts and firm for solid ones, for workpieces up to 1 kg.
- 37 mm stroke: The jaws open wider than slim 26 mm grippers, so one cell handles a wider range of part sizes.
- Holds on power loss: The jaws keep the workpiece when power drops, so parts are not released during stops.
- IP54 protection: The body resists dust and splashing in normal workshop and machine-tending conditions.
- Standard industrial control: Modbus RTU over RS485 and digital I/O are standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Gripper Maker | DH Robotics |
| Model | PGC-50-35 |
| Dobot Part Number | 1200000254 |
| Product Type | Collaborative electric parallel gripper |
| Gripping Force (per jaw) | 15 to 50 N, adjustable |
| Stroke | 37 mm |
| Recommended Maximum Payload | 1 kg |
| Opening / Closing Time | 0.7 s / 0.7 s |
| Position Repeatability | ±0.03 mm |
| Drive | Precision planetary reducer with rack and pinion |
| Self-Locking | Holds the workpiece on power loss |
| Weight | 0.5 kg |
| Dimensions | 124 × 63 × 63 mm |
| Communication | Modbus RTU (RS485), digital I/O; optional TCP/IP, USB 2.0, CAN 2.0A, PROFINET, EtherCAT |
| Rated Voltage | 24 V DC ±10% |
| Rated / Peak Current | 0.25 A / 0.5 A |
| Noise | Below 50 dB |
| Ingress Protection | IP54 |
| Operating Environment | 0 to 40 °C, below 85% RH |
| Certifications | CE, FCC, RoHS |
| Flange Adapter and Cable for Your Robot | Confirm at quote |
Industries
Frequently Asked Questions
A collaborative electric parallel gripper made by DH Robotics and supplied by Dobot for its cobots, with the drive controller built into the gripper.
15 to 50 N per jaw, adjustable in software, for workpieces up to 1 kg.
The jaws keep hold of the workpiece.
Both grip with 15 to 50 N per jaw. The PGC-50-35 opens 37 mm and is rated IP54; the PGEA-50-26 is slimmer, opens 26 mm, is rated IP40 and cycles faster at 0.3 s.
Dobot collaborative robots. The flange adapter and cable for your robot model are confirmed before the order.
The Dobot DH PGC-50-35 Electric Gripper is priced at €2.660 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
